All Issue

2024 Vol.14, Issue 2 Preview Page

Scientific Paper

A study on the effect of physical properties on Indonesian natural asphalt binder produced by foaming equipment

기포 장치에 의한 기포 발생이 인도네시아 천연 아스팔트 바인더의 물리적 특성에 미치는 영향 연구

Ilhwan Kang1
,
YongJoo Kim2*
,
Kanghun Lee3
,
Harmein Rahman4
,
Fanny Tri Novitasari Siregar5
,
Raihan Arditama Harnedi5
강 일환1
,
김 용주2*
,
이 강훈3
,
하르메인 라흐만4
,
파니 뜨리 노비따사리 시레가르5
,
라이한 아르디따마 하르네디5
1Postdoctoral Researcher, Korea Institute of Civil Engineering and Building Technology, Department of Highway & Transportation Research
2Research Fellow, Korea Institute of Civil Engineering and Building Technology, Department of Highway & Transportation Research
3Senior Researcher, Korea Institute of Civil Engineering and Building Technology, Department of Highway & Transportation Research
4Professor, Bandung Institute of Technology, Faculty of Civil and Environmental Engineering
5Assistant Researcher, Bandung Institute of Technology, Faculty of Civil and Environmental Engineering
1한국건설기술연구원 도로교통연구본부 박사후연구원
2한국건설기술연구원 도로교통연구본부 연구위원
3한국건설기술연구원 도로교통연구본부 수석연구원
4반둥공과대학교 건설환경공학부 교수
5반둥공과대학교 건설환경공학부 연구원
*Corresponding Author
31 December 2024. pp. 133-144
PDF XML Citation
Abstract

This study is conducted to investigate the effect of physical properties for Indonesian natural asphalt binder(Asbuton) before and after foaming mechanical foaming equipment. Two types of Indonesian natural asphalt binders (Asbuton PG70 and Asbuton PG76) are selected with one Indonesian conventional asphalt binder (Pen 60-70) as a comparison. The laboratory physical properties tests are conducted in compliance with Indonesian standards ‘Spesifikasi Umum 2018 (Revisi 2)’. Asbuton PG76 is excluded as it did not meet the high-temperature performance grade criteria. The foaming characteristic test and MSCR (Multiple Stress Creep Recovery) test are conducted to compare physical properties of Indonesian natural asphalt binder and conventional asphalt binder before and after foaming. Based on the limited test results, Asbuton PG70 exhibited an OWC (Optimum water content) similar to Pen6070 in the foaming characteristic test, with a relatively longer foaming retention time. The physical properties change due to foaming effect is not observed and the same trend is found in the MSCR test. Therefore, Asbuton PG70 is more suitable to harmonize foamed asphalt technology in Indonesia. Further research through foamed asphalt mixtures using Indonesian natural asphalt binder would be conducted for the future.

Keywords
Asbuton
Foaming
Half-life
MSCR
References
1

Abhary, E., Siksha, S. and Aravind, K.S. (2021). "Modelling of Expansion Ratio and Half-Life of Foamed Bitumen using Gene Expression Programming", International Journal of Pavement Engineering, 22(3), pp. 369-381.

10.1080/10298436.2019.1609675
2

Budi, G.S., Ariwibowo, D.S. and Jaya, A.T. (2002). "Pengaruh Pencampuran Abu Sekam Padi Dan Kapur Untuk Stabilisasi Tanah EksPansif", Civil Engineering Dimension, 4(2), pp. 94-99.

3

Buton Asphalt Indonesia (BAI) (2024). PT Buton Asphalt Indonesia. Online access: http://bai.co.id/produsen-aspal-buton-di-indonesia.php (2024.11.13.)

4

Cha, S.M. (2018). "Comparative Analysis of MSCR New Binder Specification Advantages and PG Binder Specifications", Journal of Korean society of Road engineers, 20, pp. 43-51.

5

Erdawaty, Samang, L., Muhiddin, A.B. and Arsyad, A. (2019). "Characteristics Study of Buton Granular Asphalt as Filling Material of Column", IOP Conference Series : Earth and Environmental Science (ICCEE 2019), 419(1), pp. 1-8.

10.1088/1755-1315/419/1/012042
6

Furqon Affandi (2012). "The performance of Bituminous Mixes using Indonesia Natural Asphalt", 25th Australian Road Research Board (25th ARRB) Conference, pp. 1-12, Australia.

7

Huda, A.A. and Sapto, B. (2020). "Analysis Mixed Layer Asphalt Surface as Asbuton AC-WC Characteristics of Marshall", International Journal of Integrated Education, Engineering Business, 3(2), pp. 112-143.

10.29138/ijieeb.v3i2.1173
8

Ivan, M.D., Ilyin, A.B., Bambang, H.S. and Mohammad, N. (2013). "Asphalt Production from Asbuton Rock by Extraction Using Weak Acid", Chemical and Materials Engineering, 1(2), pp. 35-42.

10.13189/cme.2013.010202
9

Joëlle, D.V., Antonio, P.D., Pilar, C., Virginia, C., Radek, C., Graziella, D., Tobias, H. and Ian, L. (2016). "European Round Robin Tests for the Multiple Stress Creep Recovery Test and Contribution to the Development of the European Standard Test Method", 6th Eurasphalt & Eurobitumen Congress (E&E Congress 2016), Prague, Czech Republic.

10

Kang, S.I., Lee, K.H., Kim, Y.J. and Lee, J.J. (2020). "A Basic Study on Quality Evaluation for Korean Foamed Asphalt Mixture", International Journal of Highway Engineering, 22(6), pp. 77-86.

10.7855/IJHE.2020.22.6.077
11

Lee, S.J. and Lee, J.S. (2021). "Evaluation of the Mechanical Properties of High -Viscosity Polymer Modified Asphalt Binders via PG and MSCR tests", International Journal of Highway Engineering, 23(1), pp. 47-53.

10.7855/IJHE.2021.23.1.047
12

Ministry of Public Work and Housing (PUPR) (2018). Spesifikasi Umum 2018 (Revisi 2): Untuk Pekerjaan Konstruksi Jalan Dan Jembatan, Standard, Indenesian.

13

Zamhari, K. (1989). Research on Various Asphalt Mixtures for Tropical Climate of Indonesia. Research Report, Bandung: Institute of Road Engineering.

Information
  • Publisher :KOREAN ASPHALT INSTITUTE
  • Publisher(Ko) :한국아스팔트학회
  • Journal Title :Journal of the Korean Asphalt Institute
  • Journal Title(Ko) :한국아스팔트학회지
  • Volume : 14
  • No :2
  • Pages :133-144
  • Received Date : 2024-12-15
  • Revised Date : 2024-12-24
  • Accepted Date : 2024-12-31
  • DOI :https://doi.org/10.22702/jkai.2024.14.2.11
Journal Informaiton Journal of the Korean Asphalt Institute Journal of the Korean Asphalt Institute
Online submission
  • KISTI Current Status
  • KISTI Cited-by
  • KCI 문헌 유사도 검사
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close