All Issue

2020 Vol.10, Issue 1 Preview Page

Scientific Paper

Investigation of binder and aggregate specification using high friction surface treatment for aged asphalt and concrete pavement

노후아스팔트 및 콘크리트 포장의 고마찰 표면처리 공법 바인더 및 골재시방에 관한 조사연구

Young Doo Jang1
,
Jea Sick Lee2*
,
Young Geon Lee3
장 영두1
,
이 재식2*
,
이 영건3
1CEO, Seil Matrix
2Director, Seil Matrix
3Master Course, Department of Civil Engineering, Seoul National University of Science and Technology
1(주)세일매트릭스 대표이사
2(주)세일매트릭스 소장
3서울과학기술대학교 건설시스템공학과 석사과정
* Corresponding Author
30 June 2020. pp. 83-96
PDF XML Citation
Abstract

This study presents specification for the binder and aggregate using the high friction surface treatment for aged asphalt and concrete pavement. The high friction surface treatment method is well known as cost effective and provided the preservation benefits to the existing pavement road. There found a various binders and aggregate using for the high friction surface treatment methods. The binders and aggregate are the key materials to maintain the quality surface treatment. The results show that standards for binders and aggregates differ depending on the region.

Keywords
High friction surface treatment
Standards for binders and aggregates
References
1
Alaska DOT (2004). Special provision-high friction surface treatment, Alaska DOT, Alaska.
2
ALDOT (2019). High friction surface treatment for asphalt pavement, ALDOT, Alabama.
3
Gao, H., Yang, B.-J., Li, N., Feng, L.-M., Shi, X.-Y., Zhao, W.-H. and Liu, S.-J. (2015). "Bisphenol a and hormone-associated cancers: Current progress and perspectives", Medicine, 94(1), pp. 1-8.
10.1097/MD.000000000000021125569640PMC4602822
4
MDOT (2016). Special provision for high friction surface treatment, MDOT, Michigan
5
MDT (2018). High Friction Surface Treatments, MDT, Minnesota.
6
Michael, H., Pamela, T. and Mary, G. (2015). High friction surface treatments alternative aggregates study, National Center for Asphalt Technology.
7
NCAT (1996). Hot mix asphalt materials, mixture design and construction, National Center for Asphalt Technology, pp. 17-19.
8
Park, T.S. and Kim, J.S. (2007). "Performance and serviceability of the ultrathin pavement mixture", Journal of the Korean Society of Civil Engineers, D. 27(1D), pp. 67-72.
9
TDOT (2015). Special provision regarding high friction surface treatment (HFST), TDOT, Tennessee.
10
TxDOT (2014). Special specification 3037 high friction surface treatment, TxDOT, Texas.
11
Wilson, B. and Mukhopadhyay, A. (2016). Alternative aggregates and materials for high friction surface treatments, Texas A&M Transportation Institute, Texas DOT, Texas.
12
Wisconsin DOT (2019). Resin binder high friction surface treatment, Item SPV.0180.XX. Wisconsin DOT, Wisconsin.
13
Xiaoyu, W.C. (2018). Laboratory evaluation of an innovative and cost effective high-friction surface treatment, M.A. Thesis, Michigan State University, Michigan.
14
Xiaoyu, W.C., Michele, A.L., Kutay, M.E. and Larry, G. (2019). "Performance evaluation of an innovative high-friction surface treatment", Transportation Research Record 2019, 2673(3), pp. 485-493.
10.1177/0361198119825640
Information
  • Publisher :KOREAN ASPHALT INSTITUTE
  • Publisher(Ko) :한국아스팔트학회
  • Journal Title :Journal of the Korean Asphalt Institute
  • Journal Title(Ko) :한국아스팔트학회지
  • Volume : 10
  • No :1
  • Pages :83-96
  • Received Date : 2020-06-01
  • Revised Date : 2020-06-11
  • Accepted Date : 2020-06-16
  • DOI :https://doi.org/10.22702/jkai.2020.10.1.008
Journal Informaiton Journal of the Korean Asphalt Institute Journal of the Korean Asphalt Institute
Online submission
  • KISTI Current Status
  • KISTI Cited-by
  • KCI 문헌 유사도 검사
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close