All Issue

2024 Vol.13, Issue 2 Preview Page

Scientific Paper

3D pavement surface monitoring vehicle feasibility evaluation by means of low temperature Bending Beam Rheometer (BBR) mixture test
Ki Hoon Moon1*
,
Dueck Su Sohn1
1Principal Researcher (Ph.D.), Korea Expressway Corporation Pavement Research Division (KECPRD), 208-96, Dong Budaero 922, Dong Tan, Hwa Seong city, Gyung Gi do, South Korea
*Corresponding Author
17 January 2024. pp. 278-288
PDF XML Citation
Abstract

In South Korea, the concept of Highway Pavement Management System (HPMS) was developed since early 2000. During this periods, numbers of professional pavement condition monitoring equipment were developed and applied in the actual field. One of the remarkable achievements is 3D Pavement condition Monitoring profiler vehicle (3DPM) designed and developed in Korea Expressway Corporation Research Division (KECRD). Thanks to this equipment, the surface condition of current pavement can successfully be monitored and proper following management strategy can be established. However, the inner condition of pavement layer cannot be monitored fully due to limitation of 3DPM equipment. In this paper, extensive Bending Beam Rheometer (BBR) mixture creep test was performed to verify the effectiveness of current 3DPM equipment. Finally, it was found that the current 3DPM equipment has reasonable feasibility on surveying expressway pavement condition.

Keywords
Highway Pavement Management System (HPMS)
3D Pavement condition Monitoring profiler vehicle (3DPM)
Bending Beam Rheometer (BBR) mixture creep test
References
1
AASHTO M320-10 (2010). Standard Specification for Performance-Graded Asphalt Binder. American Association of State Highway and Transportation Officials (AASHTO).
2
AASHTO T313-12 (2012). Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR). American Association of State Highway and Transportation Officials (AASHTO).
3
Ferry, J.D. (1980). Viscoelastic properties of polymers, 3rd ed., Wiley, New York, US.
4
Findley, W.N., Lai, J.S. and Onaran, K. (1976). Creep and relaxation of nonlinear viscoelastic materials. Dover Publications, New York, US.
5
Kim, D.H., Choi, K.H., Moon, K.H. and Jeong, J.H. (2023). "RMIc-3.0 program development to prioritize concrete pavement sections for large-scale repair works", KSCE Journal of Civil Engineering, pp. 1-15. 10.1007/s12205-023-1459-0
6
Kim, D.H., Lee, J.M., Moon, K.H., Park, J.S., Suh, Y.C. and Jeong, J.H. (2019). "Development of the remodeling index model to predict the priority of large-scale repair works of concrete pavements in Korea", KSCE Journal of Civil Engineering, 23(5), pp. 2096-2107. 10.1007/s12205-019-1978-x
7
Kwon, S.H. (2017). Development of HPCI prediction model for concrete pavement using expressway PMS database. MSc Thesis, Hanyang University, Seoul, Korea.
8
Lee, J.H., Lee, K.S., Suh, Y.C. and Jeong, J.H. (2015). "Development and application of urgency index for remodeling old concrete pavement on expressway", Proceedings of the conference of Korea Society of Road Engineers, pp. 159-160.
9
Lee, J.M., Moon, K.H., Lee, J.H., Kim, J.C., Kang, M.S. and Jeong, J.H. (2017). Development of regression model for expressway concrete pavement remodeling Proceedings of the conference of Korea Society of Road Engineers, 19.
10
Marasteanu, M.O., Velasquez, R.A., Cannone Falchetto, A. and Zofka, A. (2009). Development of a Simple Test to Determine the Low Temperature Creep Compliance of Asphalt Mixtures. IDEA Program Final Report, NCHRP-133.
11
MOLIT (2013). Specification of roadway management and rehabilitation. (in Korean)
12
Moon, K.H. (2010). Comparison of thermal stresses calculated from asphalt binder and asphalt mixture creep compliance data, M.S. thesis, University of Minnesota, Twin Cities.
13
Moon, K.H. (2012). Investigation of asphalt binder and asphalt mixture low temperature properties using analogical models., Ph.D. thesis, University of Minnesota, Twin Cities.
14
Moon, K.H., Cannone Falchetto, A. and Yeom, W.S. (2014). "Low-Temperature Performance of Asphalt Mixtures Under Static and Oscillatory Loading", Arabian Journal for Science and Engineering, 39(11), pp. 7577-7590. 10.1007/s13369-014-1321-2
15
Park, S.W. and Kim, Y.R. (1999). "Interconversion between relaxation modulus and creep compliance for viscoelastic solids", American Society of Civil Engineers: Journal of materials in civil engineering, 11(1), pp. 76-82. DOI: 10.1061/(asce)0899-1561(1999)11:1(76) 10.1061/(ASCE)0899-1561(1999)11:1(76)
16
Road Korea Pavement Research Team (2023). Annual expressway pavement condition surveying report: 2022, Road Korea. (in Korean)
17
Ryu, S.W., Kim, H.W., Lee, J.H., Moon, J.B. and Sohn, D.S. (2021). "A study on the repair procedures for remodeling the old CRCP of the Jung Bu expressway", International Journal of Highway Engineering, 23(4), pp. 1-10. (in Korean) 10.7855/IJHE.2021.23.4.001
18
Sohn, D.S., Lee, J.H. and Ryu, S.W. (2018). Research of driving comfort to analysis the cause of the vibration of the pavement, (Research report) Korea Expressway Corporation. 2018-37-534.9607. (in Korean)
19
Sohn, D.S., Kwon, S.M. and Lee, J.H. (2021). Development of pavement condition assessment using advanced sensing system, (Research report) Korea Expressway Corporation. 2021-47-534.9607. (in Korean)
20
Tableau (2023). https://www.tableau.com/kr
Information
  • Publisher :KOREAN ASPHALT INSTITUTE
  • Publisher(Ko) :한국아스팔트학회
  • Journal Title :Journal of the Korean Asphalt Institute
  • Journal Title(Ko) :한국아스팔트학회지
  • Volume : 13
  • No :2
  • Pages :278-288
  • Received Date : 2023-12-03
  • Revised Date : 2023-12-20
  • Accepted Date : 2023-12-20
  • DOI :https://doi.org/10.22702/jkai.2023.13.2.22
Journal Informaiton Journal of the Korean Asphalt Institute Journal of the Korean Asphalt Institute
Online submission
  • KISTI Current Status
  • KISTI Cited-by
  • KCI 문헌 유사도 검사
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close