Journal of the Korean Asphalt Institute ISSN:2234-0785(Print) 2635-9553(Online) 한국아스팔트학회지

Bae, A., Lee, D. and Tan, J.Y. (2015). IRI reduction of HMA overlay on concrete base slab in urban tunnel expressway, Transportation Research Board 94^th annual meeting (No. 15-2432).

Bae, A., Lee, D. and Tan, J.Y. (2017). "Smoothness improvement by HMA overlay on very rough surface in urban tunnel expressway", Korea Society of Civil Engineering journal of civil engineering, 21(6), pp. 2177-2185.

Bae, A., Sung, L.H. and Jin, J.D. (2018). "Paver sensor system performances on the initial smoothness of HMA pavement", Korea Society of Road Engineers, 20(5), pp. 13-21.

Choubane, B., McNamara, R.L. and Page, G.C. (2002). "Evaluation of high-speed profilers for measurement of asphalt pavement smoothness in Florida", Transportation research record, 1813(1), pp. 62-67.

Dalla, R.F., Liu, L. and Gharaibeh, N.G. (2017). "IRI prediction model for use in network-level pavement management systems", American Society of Civil Engineering Journal of Transportation Engineering, Part B: Pavements, 143(1), p. 04017001.

Elagamy, N.M.H. (2016). An experimental and numerical study of three-dimensional fatigue damage in carbon fiber reinforced polymers, Doctoral dissertation, Carleton University.

Gillespie, T.D., Sayers, M.W. and Segel, L. (1980). Calibration of response type road roughness measuring systems, National Cooperative Highway Research Program report (No. 228).

Gong, H., Sun, Y., Shu, X. and Huang, B. (2018). "Use of random forests regression for predicting IRI of asphalt pavements", Construction and Building Materials, 189, pp. 890-897.

Li, N., Qin, R. and Liu, Z. (2013). "Performance Measures and Evaluation of Asphalt Pavements Using the Internal Roughness Index", 1^st International symposium on pavement and geotechnical engineering for transportation infrastructure: In Pavement and Geotechnical Engineering for Transportation, pp. 19-30.

McGhee, K.K. and Gillespie, J.S. (2007). "Value of pavement smoothness", Transportation Research Record Journal of the Transportation Research Board, 2040(1), pp. 48-54.

MOBA group (2022). Sonsor product information, https://moba-parts.com/sensors/

MOLIT (2017). Guideline for production and construction of asphalt mixture (specification), Ministry of Land Infrastructure and Transportation. (in Korean)

MOLIT (2019). Road practice manual. Ministry of Land Infrastructure and Transportation. (in Korean)

Robbins, M.M. and Tran, N.H. (2016). "A synthesis report: Value of pavement smoothness and ride quality to roadway users and the impact of pavement roughness on vehicle operating costs", National Center For Asphalt Technology report 16-03, Auburn University, Auburn, Alabama.

Sayers, M.W. (1986). International road roughness experiment: establishing methods for correlation and a calibration standard for measurements. World Bank Technical Paper (No. 45. Washington, D.C.).

Sayers, M.W., Gillespie, T.D. and Paterson, W.D. (1986). Guidelines for the conduct and calibration of road roughness measurements, World Bank Technical Paper No. 46 (Washington DC).

Smith, K.L., Titus-Glover, L. and Evans, L.D. (2002). Pavement smoothness index relationships. Final report (No. FHWA-RD-02-057). United States (U.S.). Federal Highway Administration (Office of pavement technology).

Titi, H.H. and Rasoulian, M. (2008). "Evaluation of smoothness of Louisiana pavements based on international roughness index and ride number", Jordan Journal of Civil Engineering, 2(3), pp. 238-249.

Writgen group (2022). Big Multiplex Ski (product information), https://www.wirtgen-group.com/en-us/

Zaabar, I. and Chatti, K. (2014). "Estimating vehicle operating costs caused by pavement surface conditions", Transportation Research Record Journal of The Transportation Research Board, 2455(1), pp. 63-76.