Research on improving mathematical modeling to verify low-temperature performance of high-viscosity asphalt binder

Dong Min Cho; Tae Soon Park; Ki Hoon Moon

doi:10.22702/jkai.2023.13.2.17

All Issue

2024 Vol.13, Issue 2 Preview Page Next Page

Scientific Paper

Research on improving mathematical modeling to verify low-temperature performance of high-viscosity asphalt binder 고점도 아스팔트 바인더의 저온성능 검증을 위한 수학적 모델링 개선연구

17 January 2024. pp. 219-235

PDF XML

Abstract

In verifying and evaluating the low-temperature performance of high-viscosity asphalt binders, this study sought to present accurate standards to overcome the limitations of high-viscosity asphalt binders by improving the shortcomings of the previously developed mathematical modeling power in the process of reaching the All the activities were performed by advanced mathematical modeling approach and corresponding analyses. As an experimental effort, flexural beam test was performed under various temperature (-15°C, -20°C, -25°C) The analysis of test was conducted by two type of data: displacement vs. load, time vs. load, the flexural energy and the flexural stiffness. As a result of the test, various fracture phenomena occur due to the nature of the low-temperature bending test. Many difficulties are likely to arise in predicting and analyzing the low-temperature flexural beam test characteristics of high-viscosity asphalt binder using only test values. Therefore, it is believed that there is a need to accurately identify the engineering characteristics of various high-viscosity asphalt binders through mathematical modeling. To improve mathematical modeling, time-load prediction equations in the form of log-exponential function and natural log-exponential function were developed and presented based on the low-temperature bending test results.

Keywords

High-viscosity asphalt binders

Modeling

Low-temperature bending test

References

Angelo, J.D. (2011) "Current Status of Superpave Binder Specification, Taylor & Fancis", Road Materials and Pavement Design, 10, pp. 13-24. 10.1080/14680629.2009.9690233

Cai, J., Song, C., Zhou, B., Tian, Y., Li, R., Zhang, J. and Pei, J. (2019). "Investigation on High Viscosity Asphalt Binder for Permeable Asphalt Concrete with Waste Materials, ELSEVIER", Jorunal of Cleaner Production, 228, pp. 40-51. 10.1016/j.jclepro.2019.04.010

Cho, D.M., Park, T.S. and Moon, K.H. (2023). "A study on the development of mathematical modeling forthe Flexural characteristics according to the types of high-viscosity asphalt binder", Journal of the Korean Asphalt Institute, 13(1), pp. 63-78. doi:10.22702/jkai.2023.13.1.7

Falchetto, A.C. and Moon, K.H. (2015). "Comparisons of Analytical and Approximate Interconversion Methods for Thermal Stress Computation," Canadian Science Publishing, Canadian Journal of Civil Engineering, 42(10), pp. 705-719. 10.1139/cjce-2014-0558

Falchetto, A.C. and Moon, K.H. (2016). "Comparison of Thermal Stress Calculation: Hopkins and Hamming's Algorithm and Laplace Transformation Approach", ASCE, Journal of Materials in Civil Engineering, 28(9), pp. 1-12. 10.1061/(ASCE)MT.1943-5533.0001567

Falchetto, A.C. and Moon, K.H. (2017). "Simple Approach to the Investigation of Asphalt Mixture Strength on Small Beam Specimens at Low Temperature," ASCE, Journal of Materials in Civil Engineering, 29(3), pp. 1-11. 10.1061/(ASCE)MT.1943-5533.0001770

Habbouche, J., Hajj, E.Y., Sebaaly, P.E. and Piratheepan, M. (2020). "A Critical Review of High Polymer Modified Asphalt Binders and Mixtures, Taylor&Francis", International Journal of Pavement Engineering, 21(6), pp. 686-702. 10.1080/10298436.2018.1503273

Hu, M., Sun, G., Sun, D., Zhang, Y., Ma, J. and Lu, T. (2020). "Effect of Thermal Aging on High Viscosity Modified Asphalt Binder: Rheological Property, Chemical Composition and Phase Morphology", ELSEVIER, Construction and Building Materials, 241, pp. 1-13. 10.1016/j.conbuildmat.2020.118023

Kang, I. H. (2022). Evaluation of Low Temperature Performance of High Viscosity Asphalt Binder by Means of Mathematical Modeling Approach, Seoul National University of Science & Technology Ph.D. thesis.

Kluttz, R., Willis, J.R., Molenaar, A., Scarpas, T. and Scholten, E. (2012). Fatigue Performance of Highly Modified Asphalt Mixtures in Laboratory and Field Environment, Springer, 7th RILEM International Conference on Cracking in Pavements, 4, pp. 687-696. 10.1007/978-94-007-4566-7_67

KS F 2491 (2017). Bending and bending test method for asphalt binder, Korea Agency for Technology and Standards, Korea Industrial Standards Council. (in Korean)

Lu, X. and Isacsson, U. (1997). "Rheological Characterization of Styrene-Buta-diene-Styrene Copolymer Modified Bitumens", ELSEVIER, Construction and Building Materials, 11(1), pp. 23-32. 10.1016/S0950-0618(96)00033-5

Mieczkowski, P., Bartosz, B., Mieczysław, S., Jan, K. and Wojciech, S. (2021). "Experimental Study of Tensile Properties of Styrene-Butadiene-Styrene Modified Asphalt Binders", Materials, 14(7), p. 1734. 10.3390/ma1407173433916170PMC8037092

Moon, K.H. (2010). Comparison of Thermal Stresses Calculated from Asphalt Binder and Asphalt Mixture Creep Compliance Data, Master'thesis, University of Minnesota, Minnesota, USA, pp. 1-103.

Moon, K.H., Marasteanu, M.O. and Turos, M. (2013). "Comparison of Thermal Stresses Calculated from Asphalt Binder and Asphalt Mixture Creep Tests", ASCE, Journal of Materials in Civil Engineering, 25(8), pp. 1059-1067. 10.1061/(ASCE)MT.1943-5533.0000651

Qu, L., Gao, Y., Yao, H., Cao, D., Pei, G., He, B., Duan, K. and Zhou, W. (2019). "Preparation and Performance Analysis of High-Viscosity and Elastic Recovery Modified Asphalt Binder, Hindawi", Advances in Civil Engineering, 2019, pp. 1-16. 10.1155/2019/6070685

Scholten, E.J., Amsterdam, K.I.C., Timm, D.H., Willis, J.R., Kluttz, R.Q., Houston, K.I.C. and Vonk, W.C. (2011). Accelerated Loading Test Results of Two NCAT Sections with Highly Modified Asphalt, Australian Asphalt Pavement Association, 14th AAPA International Flexible Pavements Conference, Sydney, New South Wales, Australia, pp. 1-17.

Shahin, M.Y. and McCullough, B.F. (1972). Report No.1-8-69-123; Prediction of Low-Temperature and Thermal-Fatigue Cracking in Flexible Pavements, Texas Transportation Institute, pp. 1-240.

Singh, S.K., Kumar, Y. and Ravindranath, S.S. (2018). "Thermal Degradation of SBS in Bitumen during Storage: Inﬂuence of Temperature, SBS Concentration, Polymer Type and Base Bitumen", ELSEVIER, Polymer Degradation and Stability, 147, pp. 64-75. 10.1016/j.polymdegradstab.2017.11.008

Timm, D.H., Robbins, M.M., Willis, J.R., Tran, N. and Taylor, A.J. (2012). NCAT Report 12-08; Field and Laboratory Study of High Polymer Mixture at the NCAT Test Track-Interim Report, National Center for Asphalt Technology at Auburn University, pp.1-107.

Yan, C., Huang, W., Zheng, M., Zhang, Y. and Lin, P. (2020). "Influence of Ageing on High Content Polymer Modified Asphalt Mixture Stripping, Cracking and Rutting Performances, Taylor & Francis," Road Materials and Pavement Design, 22(8), pp. 1824-1841. 10.1080/14680629.2020.1727769

髙橋茂樹 (2013). 高速道路におけるポーラスアスファルトの導入効果の検証と基層の脆弱化に関する研究, 博士論文, 北海道大学, 北海道, 日本, pp. 1-132. (in Japanese)

西崎到, 新田弘之 and 加藤祐哉 (2010). 舗装路面の性能評価法の高度化に関する研究(2), 土木研究所, 平成22年度重点プロジェクト研究報告書, 9-3, pp. 1-21. (in Japanese)

羽入昭吉, 笠原篤 and 斎藤和夫 (2007). SBS 改質アスファルトの分散形態の影響とその価法について, 日本土木学会, 土木学会論文集E, 63(3), pp. 496-502. (in Japanese)

羽入昭吉, 伊藤達也, 笠原篤 and 斎藤和夫 (2004). SBS改質アスファルトの分散形態がバインダおよび混合物の性能に与える影響, 日本土木学会, 土木学会舗装工学論文集, 9, pp. 65-72. (in Japanese)

日本改質アスファルト協会 (2020). ポリマー改質アスファルトポケットガイド(7版), 日本改質アスファルト協会, サンケイ総合印刷, pp. 4-99. (in Japanese)

日本改質アスファルト協会技術委員会 (2006). 改質アスファルトの名称・準標的性状の変更について, 日本改質アスファルト協会, 改質アスファルト, 27, pp. 38-42. (in Japanese)

黄木秀実, 上坂憲一, 本松資朗, 高橋茂樹 (2002). 改質アスファルトの新たな性能評価手法と混合物性状の相関性について，日本土木学会, 土木学会第57回年次学術講演会, 5, pp. 89-90. (in Japanese)

Information

Publisher :KOREAN ASPHALT INSTITUTE
Publisher(Ko) :한국아스팔트학회
Journal Title :Journal of the Korean Asphalt Institute
Journal Title(Ko) :한국아스팔트학회지
Volume : 13
No :2
Pages :219-235
Received Date : 2023-12-04
Revised Date : 2023-12-20
Accepted Date : 2023-12-20
DOI :https://doi.org/10.22702/jkai.2023.13.2.17

Journal of the Korean Asphalt Institute ISSN:2234-0785(Print) 2635-9553(Online) 한국아스팔트학회지

All Issue