Journal of the Korean Asphalt Institute ISSN:2234-0785(Print) 2635-9553(Online) 한국아스팔트학회지

국토교통부 (2021). 도로의 구조･시설 기준에 관한 규칙, 국토교통부량 제922호.

Adalier, K. (1996). Mitigation of earthquake induced liquefaction hazards, Ph.D.Thesis, Department of Civil Engineering, Rensselaer Polytechnic Institute, Troy, NY.

Beaty, M.H. and Byrne, P.M. (1998). "An effective stress model for predicting liquefaction behavior of sand", Geotechnical Earthquake Engineering and Soil Dynamics III, 1(75), pp. 766-777.

Beaty, M.H. and Byrne, P.M. (2011). UBCSand constitutive model version 904aR, Itasca

Chan, M.P. (2005). Analysis and modeling of grouting and its application, M.Sc. Thesis, Faculty of Engineering and Surveying, University of Southern Queensland, Queensland, Australia.

Elgamal, A., Parra, E., Yang, Z. and Adalier, K. (2002). "Numerical analysis of embankment foundation liquefaction measures", Journal of Earthquake Engineering, 6(4), pp. 447-471.

Idriss, I.M. and Boulanger, R.W. (2008) Soil liquefaction during earthquakes, Earthquake Engineering Research Institute (EERI).

Makra, A. (2013). Evaluation of the UBC3D-PLM constitutive model for prediction of earthquake induced liquefaction on embankment dams, M.Sc. Thesis, Dept. of Civil Engineering, Delft University of Technology, Delft, Netherlands.

Meyerhof, G.G. (1957). "Discussion on research on determining the density of sands by spoon penetration testing", Proceedings of 4th International Conference on Soil Mechanics and Foundation Engineering, 3, p. 110.

Mohajeri, M., Kobatshi, Y., Kawaguchi, K. and Sato, M. (2004). "Numerical study on lateral spreading of liquefied ground behind a sheet pile model in a large scale shake table test", 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August 1-6, p. 2515.

Oshima, A. and Takada, N. (1997). "Relation between compacted area and ram momentum by heavy tamping", Proceeding of 14th International Conference on Soil Mechanics and Foundation Engineering (ICSMFE), 3, pp. 1641-1644.

Papadimitriou, A.G., Moutsopoulou, M.E., Bouckovalas, G.D. and Brennan, A.(2007). "Numerical investigation of liquefaction mitigation using gravel drains", Proceedings of 4th International Conference on Earthquake Engineering, paper 1548, Thessaloniki, Greece.

Papadimitriou, A.G., Vytiniotis, A.C., Bouckovalas, G.D. and Bakas, G.J.(2005). "Equivalence between 2D and 3D numerical analyses of the seismic response of improved sites", Proceedings of 8th US National Conference on Earthquake Engineering, paper 2020, San Francisco, CA.

Parra, E. (1996). Numerical modeling of liquefaction and lateral ground deformation including cyclic mobility and dilation response in soil system, Ph.D. Thesis, Dept. of Civil Engineering, Renssealaer Polytechnic Institute, Troy, NY.

Petalas, A. (2012). Validation and verification of a practical constitutive model for soil liquefaction in PLAXIS, M.Sc.Thesis, TU Delft, Netherlands.

Petalas, A. and Galavi, V. (2013). Plaxis Liquefaction Model UBC3D-PLM, PLAXIS.

Puebla, H., Byrne, P.M., and Phillips, R. (1997). "Analysis of CANLEX liquefaction embankments: prototype and centrifuge models", Canadian Geotechnical Journal, 41(5), pp. 921-942.

Sesov, V., Harada, N., Towhata, I. and Talanganov, K. (2004). Experimental investigations on drain improvement method - reduction of liquefaction potential, 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August 1-6, 2004, paper 790.

SCDOT (Southern California Department of Transport) (2008). Geotechnical performance limits, SCDOT Geotechnical Design Manual, Chapter10.

Takahashi, N., Derakhshani, A., Rasouli, R., Towhata, I. and Yamada, S. (2013). "Shaking model tests on mitigation of liquefaction-induced ground flow by new configuration of embedded columns", Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering, Paris 2013, pp. 1623-1626.

Tokida, K. (2012). Seismic potential improvement of road embankment, advances in geotechnical earthquake engineering - soil liquefaction and seismic safety of dams and monuments, pp. 269-296 (Chapter 11).

Towhata, I. (2006). "On three-stage mitigation of liquefaction-induced hazards", Asian Journal of Civil Engineering (Building and Housing), 7(4), pp. 429-452.

Tsegaye, A. (2010). Plaxis liquefaction model, report no. 1, PLAXIS knowledge base.

Zienkiewicz, O.C., Bicanic, N. and Shen, F.Q. (1989). "Earthquake input definition and the transmitting boundary conditions", Advances in Computational Nonlinear Mechanics I, pp. 109-138, Springer, Vienna.